Skip to main content

Project Your Deck Onto a TV With an Apple TV

How to present a Deck on an Apple TV without an internet connection.

Updated over a week ago

Overview

With an Apple TV and AirPlay (Screen Mirroring), you can present your Deck on a TV or projector. This setup lets you move freely while using your iPad to control slides and annotate.

You don’t need an internet connection to cast your iPad to Apple TV with AirPlay. Apple devices connect directly to each other, but Wi-Fi must be enabled so the devices can detect and pair on the same local network.

Note: Apple TV Screen Mirroring technology is only available on an Apple TV 4K or higher.


Step-by-Step Instructions

Follow these quick steps on your Apple TV and iPad to set up AirPlay (Screen Mirroring) and project your Deck to a TV or projector.

On Your Apple TV

  1. Connect your Apple TV.

    • Plug it into your TV or projector using an HDMI cable.

  2. Open Settings.

    • On your Apple TV, go to Settings > AirPlay and HomeKit.

  3. Turn on AirPlay.

    • Ensure the AirPlay toggle is set to On.

  4. Check access settings.

    • Scroll down and select Allow Access.

      • Set Allow Access to Anyone on the Same Network.

  5. Enable nearby access.

    • Under Apple TV Options, make sure Also Allow Nearby to AirPlay is turned On.

🔗 Read Set Up Your Apple TV from Apple for more information.

On Your iPad

Before presenting, always ensure that your iPads and the VRIFY App are up-to-date and meeting-ready:

✅ Update to the latest iOS

Download the Deck you want to present

✅ Click through the Deck to pre-load the 3D and 360 Slides to ensure smooth transitions

  1. Open the VRIFY app.

    • Tap the VRIFY icon to launch the app.

  2. Select your Deck.

    • Locate the Deck you want to present.

  3. Open the Deck.

    1. Tap the Deck to open, then select View Deck.

  4. Open Control Center.

    • Swipe down from the top-right corner of the screen.

      • Tip: If you see the Notification Center, try swiping down farther to the right.

  5. Tap Screen Mirroring.

    • Look for the icon with two overlapping rectangles:

  6. Select your Apple TV.

    • Choose the Apple TV connected to your display.

  7. Start presenting.

    • Your Deck will appear on the TV or projector. Navigate using your iPad as the controller.

  8. Stop presenting.

    • Open Control Center and tap the Screen Mirroring icon again. Tap Stop Screen Mirroring to disconnect from the Apple TV.

🔗 Read the Mirror your iPhone or iPad to a TV or Mac section in Apple's how-to article for more information.


Learn More


Still Have Questions?

Reach out to your dedicated VRIFY contact or email support@VRIFY.com for more information.

Did this answer your question?